Zoom Timer Guide

A Countdown Everyone in the Call
Can Actually See

In a video call, the only thing participants can see is what you share. So a meeting timer cannot be an app on your laptop — it has to be inside the shared content. Here are two setups that put it there without taking over your screen.

The constraint that decides everything

A countdown on your own screen is useless in a call. Anyone watching sees your shared window or your shared tab, so the number has to be rendered inside that share. Once you accept this, the design question becomes narrow: how do you share a timer without also sharing your notes, your toolbar, and the browser tabs you forgot to close?

There are two clean answers — share a bare timer window, or put the timer on a second device and share that device’s screen. They suit different meetings, and both cost nothing.

Setup 1 — share a bare timer window

The widget page exists for exactly this. It renders a timer and nothing else, sized to fill its window, so when you resize that window and share it, the audience sees a clean countdown instead of your whole desktop.

https://castimer.com/widget?type=countdown&duration=900&theme=light&show_brand=1

duration is seconds — 900 is fifteen minutes. Open that URL in its own browser window, size the window to roughly 16:9, and share the window rather than the full screen. Now you can keep working in other windows while the shared area shows only the countdown.

This is the lowest-friction setup: one window, one share, and the audience never sees anything you did not intend. The full parameter list is in the embed documentation.

Setup 2 — drive a second device

If the meeting has an agenda — a workshop with timed breakouts, a standup with a hard stop, a class with three activities — a single fixed countdown is not enough, because you would have to stop sharing, edit the duration, and re-share between segments.

An event timer solves this by splitting control from display. Build the agenda once: name every segment and give it a duration. The display URL — a page with a room code — goes on the device you share from; your phone becomes the remote. Between segments you press “next” on the phone and the shared screen changes without you touching the share.

The practical benefit in a call is that your cursor never appears on the shared screen. Nobody watches you fumble with a menu while the countdown runs out.

The audio problem nobody warns you about

A countdown that hits zero silently is worse than no countdown, because everyone assumes the meeting is running to plan. When you share a browser tab, the alarm sound plays on your machine — whether participants hear it depends on whether you enabled audio sharing for that tab, and on whether they have their own speakers on.

Two reliable alternatives. Find the alarm sound in the timer controls and play it yourself, out loud, on your microphone — crude, but it reaches everyone. Or accept that the countdown is visual and let the number itself be the signal: a bright fullscreen counter going from 00:10 to 00:00 is hard to miss, and it does not depend on anyone’s audio settings.

For meetings where the deadline matters, say the time out loud as it approaches. The timer supports that habit; it does not replace it.

Calls that run for hours

A workshop day is not a sequence of ten-minute timers; it is a schedule of fixed times. “Back at 14:15” is a different instruction from “fifteen minutes,” and a duration timer forces you to compute the difference every time you resume.

Use a target time instead, and the countdown stays correct across breaks without anyone restarting it:

https://castimer.com/widget?type=event&title=Session%202&date=2026-11-20T14:15:00&tz=Europe%2FLondon&theme=light

tz is worth setting deliberately. Participants join from several timezones, but the shared screen only needs to be correct for the room the meeting is anchored to — and an explicit timezone means the display does not drift if the machine driving the share is set to something else.

If the call is being recorded, remember the timer becomes part of the recording. That is usually desirable — a recording with visible timing is easier to follow later — but it does mean the countdown should be legible at the recording’s resolution, not just on your monitor. Test one minute of recording before the session rather than discovering it in the archive.

Small settings that make a visible difference

Use a light theme in daylight meetings. A dark widget on a shared screen looks like a broken video to anyone watching on a phone in a bright room; light theme reads cleanly at small window sizes.

Keep the numbers big, not the frame. Share a narrow window rather than a full-screen share. A tall, narrow column of digits is readable in a call thumbnail; a 1920-wide dashboard is not.

Stop sharing when the timer is not the topic. A countdown left on screen for forty minutes becomes wallpaper, and wallpaper stops communicating.

Open a timer you can share in ten seconds

No account, no install. Open the widget URL, size the window, share it — or build an agenda and run it from your phone.

Start a Free Timer